Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Seat Track: Service and Repair
Power Seat Track
REMOVAL
1. Remove front seat.
2. Place seat and seat track assemblies on a clean work area and disconnect the front seat track assist spring and electrical connectors.
3. Remove the seat track-to-seat cushion retaining screws. Remove the front seat cushion frame and spring from the front seat tracks.
INSTALLATION
1. Mount the front seat tracks to the front seat cushion frame and spring.
2. Install the seat track-to-front seat cushion frame and spring retaining screws. Tighten to 17-23 N.m (13-17 Lb-Ft).
3. Connect electrical connectors.
4. Install the front seat.