Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
4. Install new O-ring seal in groove of push rod. Grease recess at push rod end with silicone brake caliper grease and dielectric compound.
5. Position strut pin into disc brake caliper and in recess of parking brake lever. Insert push rod into push rod bore of disc brake caliper. Make sure
pin is positioned correctly between shaft recess and recess at end of push rod. Place key plate over push rod so locating nib fits into drilled
locating hole in disc brake caliper. Install flat washer, push rod spring and spring retainer in sequence.
Rear Disc Brake Caliper Parking Brake Mechanism
6. Insert outer spacer into piston bore.
Outer Spacer
7. Insert inner spacer into piston bore.