Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Brake Fluid: Testing and Inspection
Fluid Level
^
Always check the fluid level in the master cylinder before performing the test procedures. If the fluid level is not between 8 mm (0.31 inch) below
the MAX line on the side of the brake master cylinder reservoir and the MAX line, add high performance DOT-3 motor vehicle brake fluid.
^
If the fluid is low it may be due to pad wear. See: Disc Brake System/Testing and Inspection
^
If fluid is extremely low or empty or fluid has to be added often, check system for a leak. See: Testing and Inspection
^
If brake fluid is low, the red BRAKE indicator will illuminate.
^
To add brake fluid, clean and remove cap and pour clean brake fluid into the top of the brake master cylinder reservoir.
