Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Camshaft Bearing: Specifications
General
Bearing Inside Diameter: 27.012-26.987 mm (1.063-1.062 inch)
Tightening Specifications
NOTE: Each camshaft cap cluster is tightened individually.
Step 1 ... Tighten retaining bolts in sequence to 8-12 Nm (71-106 inch lbs.).
Step 2 ... Loosen 25 retaining bolts approximately two turns or until head of bolt is free.
Step 3 ... Retighten all bolts in sequence to 8-12 Nm (71-106 inch lbs.).
NOTE: Camshafts should turn freely.
Step 4 ... Check camshaft end play.
