Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
regulator solenoid.
64. Connect fuel charging wiring to all applicable wiring connectors.
65. Install RH and LH exhaust manifolds.
66. Install eight spark plugs and tighten to 9-20 Nm (80-177 inch lbs.).
67. Connect ignition wires to spark plugs. Refer to Powertrain Management.
68. Install ignition wire covers and retaining nuts onto valve cover studs. Tighten retaining nuts to 5-7 Nm (45-61 inch lbs.).
69. Install EGR vacuum regulator solenoid bracket and heat shield. Install two retaining nuts and tighten to 8-12 Nm (71-106 inch lbs.).
70. Install engine.