Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
-
In the one-piece design, the valve is an integral part of the refrigeration line or component. The Schrader-type valve core can be replaced if the
seal leaks.
The high-side fitting is the largest. Special couplings are required for both the high-side and low-side service ports.
-
Rotunda R-134a Low Side Quick Disconnect 176-R0036 or equivalent.
-
Rotunda R-134a High Side Quick Disconnect 176-R0037 or equivalent.
Always install the A/C charging valve cap on the service access gauge port valves after servicing the refrigerant system.
The low-pressure service access gauge port valve is located on the suction line between the suction accumulator/drier and the A/C compressor.
The high-pressure service access gauge port valve is located on the discharge line between the A/C compressor and the A/C condenser core.