Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
8. Tip front of front door window glass down to clear door filler. Remove front door window glass.
INSTALLATION
1. Position the front door window glass to the front door window regulator. Install two 1/4 inch blind rivets or two 1/4-20 x 1/2 inch hex-head bolts
with two 1/4-20 nut and washer assemblies to attach the front door window glass to the front door window regulator. Tighten the bolt and nut to
10-14 N.m (89-123 Lb-In). Equivalent metric retainers may also be used.
2. Loosely install the door window glass inner stabilizers and up-stops.
3. Install belt line weatherstrips.
NOTE: If adjustment is needed, refer to Adjustments. See: Windows and Glass/Windows/Window Glass/Adjustments/Door Window Glass
4. Cycle the front door window glass to check for proper operation.
5. When front door window glass cycles properly, tighten the stabilizer retaining screws to 10-14 N.m (89-123 Lb-In).
6. Install the front door trim panel and watershield.