Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
![background image](/ford/mustang_cobra/v8-281_4.6l_dohc_vin_v_mfi/Page-123001.png)
Power Seat Switch: Service and Repair
Seat Regulator Control Switch
REMOVAL
1. Remove two screws from seat regulator control switch bezel.
NOTE: Before servicing seat regulator control switch, check switch and housing connectors to make sure of proper mating.
2. Disconnect seat regulator control switch and housing connectors from body main wiring underneath seat.
3. Pull seat regulator control switch bezel and seat regulator control switch from seat, feeding connectors through seat regulator control mounting
bracket opening.
4. Remove seat regulator control switch from seat regulator control switch bezel by depressing mounting tabs located in the sides of the seat regulator
control switch bezel mounting cavity with two small screwdrivers.
INSTALLATION
1. Follow removal procedure in reverse order.