Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Trailing Arm Bushing: Service and Repair
REMOVAL
1. Remove rear suspension arm and bushing.
2. Place Bushing Remover T78P-5638-A5, Forcing Screw T78P-5638-A1 and Receiving Cup T78P-5638-A4 in position and remove the rear
suspension arm bushing assembly.
INSTALLATION
1. Using the Bushing Replacer T78P-5638-A3, Forcing Screw T78P-5638-A1 and Receiving Cup T78P-5638-A2 install the bushing assembly into
the rear suspension arm bushing ear of the rear axle housing.
2. Install rear suspension arm and bushing.