Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
3. Using a feeler gauge tool, select the thickest feeler blade that will enter between the Traction-Lok Clutch Gauge Tool and the differential clutch
pack. This reading will be the thickness of the new rear axle differential clutch shim.
Part No.: Dimension (Thickness)
E0AZ-4A324-G: 0.635 mm (0.025 inch)
E0AZ-4A324-H: 0.762 mm (0.030 inch)
E0AZ-4A324-C: 0.889 mm (0.035 inch)
E0AZ-4A324-D: 1.010 mm (0.040 inch)
E0AZ-4A324-F: 1.014 mm (0.045 inch)
4. Repeat Steps 1 through 4 for the opposite differential clutch pack.
NOTE: Do not mix the clutches or shims.
5. Install differential clutch packs.