Mustang Cobra V8-4.6L DOHC VIN V (2000)
4. Separate the fittings.
^
Clean and inspect the fittings for damage.
CONNECT
1. Connect the fitting.
^
Align the tube to the fitting and push until you hear a click.
NOTE: Lubricate the tube end with clean Super Premium SAE 5W-30 motor oil XO-5W30-QSP or equivalent meeting Ford specification
WSS-M2C153-G to ease assembly.
2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.
R-Clip Fittings
DISCONNECT
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
^
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING. BEFORE
SERVICING OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL SYSTEM
PRESSURE MUST BE RELIEVED TO PREVENT ACCIDENTAL SPRAYING OF FUEL, CAUSING POSSIBLE PERSONAL
INJURY OR A FIRE HAZARD.
CAUTION: Do not use any tools. The use of tools may cause a deformity in the clip components which may cause fuel leaks.
1. Relieve the fuel system pressure. For additional information, refer to Fuel Pressure Release.