Mustang Cobra V8-4.6L DOHC VIN V (2000)
Repairs and Inspections Required After a Collision: Service and Repair
Safety Belt Procedure After A Collision
WARNING: ALL SAFETY BELT ASSEMBLIES INCLUDE RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT
ASSEMBLIES (SLIDE BAR), IF EQUIPPED, SHOULDER BELT HEIGHT ADJUSTER, IF EQUIPPED, CHILD SAFETY SEAT TETHER
BRACKET ASSEMBLIES, IF EQUIPPED, AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL
BELT ASSEMBLIES SHOULD BE INSTALLED NEW UNLESS 8 QUALIFIED TECHNICIAN FINDS THE ASSEMBLIES SHOW NO
DAMAGE AND OPERATE CORRECTLY. BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED.
NEW SAFETY BELT ASSEMBLIES SHOULD BE INSTALLED IF EITHER DAMAGE OR INCORRECT OPERATION IS NOTED.
NOTE: The driver and front passenger seat belt system (including belt and retractor assembly, buckles, and height adjusters) must be replaced if the
vehicle is involved in a collision that results in deployment of the front air bags and safety belt pretensioners.
1. Before installing a new safety belt assembly, the safety belt attaching areas must be inspected for damage and distortion. If the attaching points are
damaged and distorted, the sheet metal must be worked back to its original shape and structural integrity.
2. Install the new safety belt(s). Carry out the Functional Test.
