Mustang Cobra V8-4.6L DOHC VIN V (2000)
13. Remove and discard the cotter pin and nut.
14. CAUTION: Do not strike the toe link or the knuckle to disconnect the toe link from the knuckle.
Using the special tool, disconnect the toe link from the knuckle.
15. Mark the cam bolt position relative to the upper suspension arm and bushing.
16. Disconnect the knuckle from the lower suspension arm and bushing.
1. Remove and discard the nut and bolt.
2. Disconnect the knuckle from the lower suspension arm and bushing.
17. Note: Mark the new cam bolt in the same position as the old one for assembly reference before discarding the old bolt.
