Mustang Cobra V8-4.6L DOHC VIN V (2000)
![background image](/ford/mustang_cobra/v8-4.6l_dohc_vin_v/Page-1496004.png)
Carefully remove the halfshaft with both hands.
16. Install the special tool.
Installation
1. Note: This procedure applies to both the LH and RH halfshafts.
Install a new driveshaft bearing retainer circlip.
2. Remove the special tool.
3. CAUTION: Differential seal damage will occur if installing the halfshaft without the special tool installed.
Install the special tool.