Mustang GT V8-4.6L SOHC VIN X (1998)
Camshaft: Testing and Inspection
End Play
1. Push camshaft toward rear of engine. Install Dial Indicator with Bracketry 100-002 (TOOL-4201-C) or equivalent so indicator point is on
camshaft sprocket bolt.
NOTE: Dial indicator may also be installed on rear of engine with indicator point placed on flat area of camshaft end.
2. Zero the dial indicator. Pull camshaft forward and release it. Compare dial indicator reading with specifications. If end play is too tight, check for
binding or foreign material in camshaft thrust bearing. If end play is excessive, check for worn camshaft thrust journal and cylinder head thrust
surface. Replace worn components as required.
3. Remove dial indicator.