Mustang GT V8-4.6L SOHC VIN X (1998)
Piston Ring: Service and Repair
Fitting
1. Select proper piston ring set for size of cylinder bore.
NOTE: Always use a piston ring expanding tool to install rings on a piston.
2. Position piston ring in corresponding cylinder bore.
CAUTION: Use care when installing piston ring to avoid possible damage to piston ring or cylinder bore.
3. Insert piston ring into cylinder bore using a piston. Push piston ring slightly beyond bottom of ring travel, 115 mm (4.5 inches) from cylinder
block deck face.
4. Verify position of piston ring in bore is square with cylinder wall and check piston ring end gap.