Mustang GT V8-4.6L SOHC VIN X (1998)
intake valve at 114 degrees after Top Dead Center (TDC).
NOTE: If not at maximum lift, loosen camshaft sprocket bolt and repeat Steps 12-15.
19. Remove Cam Positioning Tool Adapters 303-413 (T92P-6256-A) and Cam Positioning Tool 303-380 (T91P-6256-A) and Crankshaft Holding
Tool 303-448 (T93P-6303-A).
20. Install engine front cover, oil pan and valve covers.
21. Start engine and check for leaks and proper operation.