Mustang GT V8-4.6L SOHC VIN X (1998)
Evaporator Case: Service and Repair
NOTE:
^
Whenever an A/C evaporator core is replaced, it will be necessary to replace the suction accumulator/drier.
^
If an evaporator leak is suspected, the A/C evaporator core must be leak-tested before it is removed from the vehicle.
SPECIAL SERVICE TOOL(S) REQUIRED
Description
Tool Number
Spring Lock Coupling Disconnect Tool (1/2 Inch)
412-027(412-027 (T81P-19623-G2))
REMOVAL
1. Disconnect battery ground cable.
2. Remove instrument panel.
3. Place a drain pan or suitable container under the heater water hose connections at the cowl panel.
4. Following proper procedures, recover refrigerant from A/C system at service access gauge port valve located on suction line. Observe all safety
precautions. See: Service and Repair/Refrigerant Recovery
5. Remove suction accumulator/drier.