Mustang GT V8-4.6L SOHC VIN X (1998)
6.
Disconnect the EGR vacuum line and canister purge line from rear of throttle body. Disconnect the vacuum harness from the front of the throttle
body. See Figure 2.
7.
Disconnect Throttle Position (TP) sensor and Idle Air Control (IAC) electrical connectors.
8.
Disconnect accelerator and speed control cables from throttle body. Refer to Figure 3.
9.
Remove two (2) throttle cable bracket retaining bolts, then disengage return spring. Position assembly out of the way. See Figure 3.