Mustang GT V8-4.6L SOHC VIN X (1998)
![background image](/ford/mustang_gt/v8-4.6l_sohc_vin_x/Page-930001.png)
Ignition Cable: Service and Repair
REMOVAL
1. Disconnect ignition wire from spark plug by grasping the boot and twisting slightly in both directions to free it.
CAUTION:
-
The Generator (GEN) must be removed to allow for accessibility of the ignition wires that are routed below the generator.
-
Do not pull on the ignition wire directly as the wire may separate from the connector inside the boot.