Mustang GT V8-4.6L SOHC VIN X (1998)
Thrust Washer/Bearing: Service and Repair
Thrust Bearings Cleaning and Inspection
Wash thrust bearings thoroughly in cleaning solvent. Blow bearings dry with compressed air.
Make certain bearings are clean and then lubricate with transmission fluid. Replace any bearings and races which show signs of pitting or roughness.
Thrust bearings should not be disassembled. Therefore, pitting is not visible. If any thrust bearing feels rough after proper cleaning and lubrication, it
should be replaced. Disassembled thrust bearings should never be reused. Engine truncated at 294 ft. lbs. for stall speed projection.