Mustang GT V8-4.6L SOHC VIN X (1998)
Wiper Blade: Adjustments
1. Remove the windshield wiper pivot arm and windshield wiper blade from the windshield wiper mounting arm and pivot shaft.
2. Turn the multi-function switch to LO position, allow the windshield wiper motor to move the windshield wiper mounting arm and pivot shaft three
or four cycles, and then turn off the multi-function switch. This will place the windshield wiper mounting arm and pivot shaft in park position.
3. Install the arm and blade assemblies on the pivot shafts to Dimension A (RH) or Dimension B (LH) as shown in the provided illustration.