Probe L4-121 2.0L DOHC VIN A MFI (1993)
Immediately contact any owner whose name is not on the list. Give owner a copy of the Owner Letter, and arrange a service date.
DISTRICT CONTACT
Advise district office if:
-
an owner cannot be contacted.
-
an owner does not make a service date.
FPSD CONTACT
Talk with your FPSD Service Zone Manager about all matters.
FORM 1863/64
Submit 1864 claims using DWE for all completed vehicles. You may use your original 1863 for your record file copy.
WARRANTY AND POLICY MANUAL
See Section 6.3 pages 5 through 8 of your Warranty and Policy Manual for claims preparation.
PARTS RETURN
See Attachment II, for information on shipping of removed strut(s) to the Warranty Parts Return Center
Attachment II - Labor and Parts Information
ATTACHMENT II
SAFETY RECALL 93S64
1993 Probe Liftgate Strut Pivot Pin
LABOR ALLOWANCES
Inspect
0.2 Hrs. - Insert in Box "A" on Form 1864
Remove/Install One Liftgate Strut (Includes Inspection Time Above, and Supplementary Time for Second Drive-in of Vehicle).
0.4 Hrs. - Insert in Box "B" on Form 1864
Remove/Install Both Liftgate Struts (Includes Inspection Time Above, and Supplementary Time for Second Drive-in of Vehicle).
0.5 Hrs. - Insert in Box "C" on Form 1864
Administrative Allowance
0.1 Hrs.
NOTE:
Add 0.1 hour Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts by calling Renkim Corporation (1-800-325-5621). When ordering your parts, please be
prepared to do the following:
^
Announce Recall 93S64
^
Give your name, Dealer name, P&A code
^
VIN, engine, transmission, rear wiper/washer options
PARTS RETURN
Return the removed strut(s), freight prepaid to:
Warranty Parts Return Center
1285 South Mill Street
Plymouth, Mi. 48170
c/o Safety Recall 93S64
CLEARLY MARK ON OUTSIDE OF BOX: PROGRAM 93S64
Wire tag the removed strut(s) - include your: