Probe L4-133 2.2L SOHC (1990)
Trip Computer: Customer Interest
Trip Computer - Displays Inaccurate Readings
Artlcle No. 90-10-6
TRIP COMPUTER - DISPLAYS INACCURATE AVERAGE FUEL ECONOMY AND DISTANCE TO EMPTY READINGS - VEHICLES BUILT
FROM JOB # 1 THROUGH 1/31/90
FORD:
1990 PROBE
ISSUE:
The service modification procedure described in TSB 90-5-5 can only be performed on the original display assembly. If the trip computer
was replaced prior to the publication of TSB 90-5-5, the service replacement trip computer assembly may cause the same inaccurate readings.
The service replacement can not be modified.
ACTION:
Install a new trip computer display assembly if the original unit was replaced and the subject concern was not resolved. Refer to the
following procedure for service details.
1. Remove the trip computer display assembly. Refer to the 1990 Probe Shop Manual, Section 33-61 for removal procedure.
2. Examine the trip computer display cover for the number "KA-36".
3. If "KA-36" is observed, modify the trip computer display as specified in TSB 90-6-5.
4. If any number other than "KA-36" is seen, the display is a service instafled part and can not be modified. The display assembly must be replaced.
Refer to the Parts Block for correct parts usage.
NOTE:
IF THE TRIP COMPUTER DISPLAY IS MODIFIED OR REOUIRES REPLACEMENT, THE DISTANCE TO EMPTY (DTE) WILL
DISPLAY -- MILES UNTIL THE VEHICLE IS DRIVEN 60-80 MILES.
PART NUMBER
PART NAME
CLASS
F02Z-10D929-B
Trip Computer Display Asay.
C
(1990, 3.0L)
F02Z-10D929-A
Trip Computer Display Asay.
C
(1990, 2.2L)
E92Z-10D929-A
Trip Computer Display Asay.
B
(1989, 2.2L)
OTHER APPLICABLE ARTICLES: 90-5-5
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION
DESCRIPTION
TIME
901006A
Replace Trip Computer
0.8 Hr.
DEALER CODING
BASIC PART NO.
CONDITION CODE
10D929
09
OASIS CODES:
2300, 2400
