ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

EEC Processors/Engine Harness - Production Changes|Page 3078 > < Electronic Spark Control Module|Locations|Page 3073
Page 1
background image

Engine Control Module: Technical Service Bulletins
EEC Processors/Engine Harness - Production Changes

ENGINE ELECTRONIC CONTROLLER AND WIRE HARNESS CONNECTOR - 2.2L NON-TURBO - PRODUCTION

CHANGES
Article No. 90-15-5
FORD:

1989 PROBE

ISSUE:

Cars built after 1/18/89 have different EEC processors and engine harnesses than cars built before 1/18/89. The two
(2)

different types of EEC processors and engine harnesses are NOT interchangeable. The connector colors of the EEC processor and
engine wiring harness MUST match.

ACTION:

Refer to one of the following EEC Processor and Engine Harness Connector Replacement Charts for the correct service parts usage.
NOTE:

BE SURE THE PARTS INSTALLED HAVE THE WIRE/PIN CONNECTOR COLORS MATCHING THE ENGINE
HARNESS.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

2770, 680000

EEC Processors/Engine Harness - Production Changes|Page 3078 > < Electronic Spark Control Module|Locations|Page 3073