ford Workshop Repair Guides

Ford Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Brake Switch (Cruise Control): Service and Repair

The brake on/off switch is located to the right of the steering column base, above the accelerator pedal bracket.

1.

Disconnect battery ground cable.

2.

Disconnect electrical connector from back of switch.

3.

Rotate switch 90 degrees in either direction and remove it from mounting bracket.

4.

Reverse procedure to install.

Cruise Control > Brake Switch (Cruise Control) > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >