Probe V6-153 2.5L DOHC (1994)
Spring And Shock To Wheel Knuckle
9. Remove the two front spring and shock-to-front wheel knuckle bolts.
NOTE: If the wheel hub binds on the front wheel drive shaft and joint splines, it can be loosened by lightly tapping with a plastic faced hammer on the
end of the front wheel driveshaft and joint.
10. Separate the front wheel knuckle from the front wheel driveshaft and joint.
11. Remove the front wheel knuckle.
Installation
1. To install, reverse the removal procedure. Refer to the Torque Specifications.
