ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - EEC Processor Replacement|Page 2646 > < Body Control Module|Locations
Page 1
background image

Technical Service Bulletin # 91E08

Date: 910801

Recall - EEC Processor Replacement

RECALL NUMBER 91E08

Date  August, 1991

To:

All Dealers

SUBJECT:

Emissions Recall 91E08 Electronic Engine Control (EEC) Processor Replacement on Certain 1990-Model Probes

AFFECTED VEHICLES

1990-model 49-States and Canadian Probes equipped
with 3.0L engines having calibration code 0-10B-R00 and automatic transmissions.

REASONS FOR RECALL

A Ford in-house compliance test program has
revealed that engines in some of the affected cars may be releasing levels of carbon monoxide (CO) that exceed Federal
and Canadian exhaust emission standards.

SERVICE ACTION

Probes returned for service will have the electronic
engine control (EEC) processor replaced and Authorized Modifications and Special Service Information decals attached.

ATTACHMENTS

Attachment I
- Administrative Information

Attachment II
- Labor Allowances
- Parts Ordering Information

Attachment III
- Technical Information

Attachment I - Administrative Info.

OASIS

YOU MUST USE OASIS TO DETERMINE IF A CAR IS ELIGIBLE FOR
THIS RECALL.

PLEASE NOTE

CORRECT ALL USED CARS IN STOCK BEFORE DELIVERY

PROMPTLY

Affected cars on the enclosed list and other

CORRECT

eligible cars on hand or brought to your dealership.

DEALER-OWNER

Immediately contact any owner you know of whose name

CONTACT

is not on the list. Give the owner a copy of the Owner
Letter.

DISTRICT

Advise FPSD district office if:

CONTACT

- an owner cannot be contacted.
- an owner does not make a service date.

FPSD CONTACT

Talk with your FPSD Service Zone Manager about recall
concerns.

REIMBURSEMENT

Claim Form 1864 will no longer be mailed to owners.
Submit claims using tbe 1864 format on the DWE screen. (Refer to your Warranty and Policy Manual Section 6.3 pages
5-8). Use an original repair order for your service record file.

Attachment II - Labor & Parts Info.

LABOR ALLOWANCE

Replace the Electronic Engine Control (EEC) Processor, Prepare and Attach the Authorized Modifications and Special Service Information Decals.

0.4 Hrs. - insert in Box "B" on Form 1864

Recall - EEC Processor Replacement|Page 2646 > < Body Control Module|Locations