ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Diagnosis and Testing > < Rear Bumper
Safety Belt System - Safety Belt System Puma 1998 (06/1997-12/2001)
Description and Operation

 
Item
Part Number
Description
1
-
Rear safety belt assembly
2
-
Pyrotechnic seat belt pretensioner
3
-
Front safety belt retractor

The Puma is fitted with inertia reel safety belts for the front and rear seats. The front seats are also fitted with pyrotechnic pretensioners.

Safety belts are life saving devices and therefore should be checked and tested with care at regulator intervals.

Safety belts that have been utilized in an accident should always be replaced irrespective of their visual appearance or apparent condition.

WARNING:
WARNING:Un-deployed pyrotechnic pretensioners represent a danger during disposal, therefore, all such pretensioners must be deployed in accordance with the relevant operation. Refer to the procedure in this section.

The pyrotechnic pretensioner is an integral part of the safety belt buckle. It is deployed by the air bag control module and, in the event of a frontal impact, which exceeds a predetermined limit, the charge is initiated which fires the pretensioner. The pretensioner draws in the buckle which reduces the free-play in the safety belt.

The pyrotechnic pretensioner is controlled and monitored by the air bag control module. Should a fault be sensed, the warning indicator within the instrument cluster will flash. For additional information, refer to Section  501-20A Safety Belt System / 501-20B Supplemental Restraint System.

Safety Belt Cleaning

WARNING:
WARNING:Failure to follow recommended cleaning instructions or procedures may adversely affect the durability and performance of components.
WARNING:
WARNING:Do not bleach or attempt to alter the color of the seat belt webbing. Failure to follow manufacturers instructions may affect the strength and durability of the safety belt webbing.
CAUTION:
CAUTION:Test a small area of fabric away from normal view before attempting to clean the main area.
CAUTION:
CAUTION:Do not allow the cleaning agent to come into contact with the retractor mechanism.

Use only Ford recommended upholstery cleaner to clean the safety belt webbing.

Diagnosis and Testing > < Rear Bumper