Disassembly and Assembly Special Tool(s) | Compressor, Coil Spring 204-167 (14-042) | | Adapters for 204-167 204-167-01 (14-042-01) | | Adaptor for 204-167 204-167-01 (14-042-01) | Disassembly | -
NOTE:One adaptor from each of the kits is used on this procedure. Remove the strut and spring assembly. For additional information, refer to: Strut and Spring Assembly (204-01, Removal and Installation). | | -
WARNING:As the spring is under extreme tension care must be taken at all times. Failure to follow this instruction may result in personal injury. Using the special tool, compress the spring. | | -
Disassemble the strut and spring assembly - Remove the thrust bearing nut.
- Remove the thrust bearing.
- Remove the upper spring seat.
- Remove the spring.
- Remove the bump stop.
- Remove the dust cover.
| Assembly | -
NOTE:Make sure that the spring ends butt correctly against the upper and lower spring seats. To assemble, reverse the disassembly procedure. | | |