Ranger 2WD L4-122 2.0L SOHC (1984)
Neutral Safety Switch: Adjustments
Fig. 3 Neutral safety switch adjustment. C5 automatic transmission
C5 UNITS
1.
Loosen neutral safety switch attaching bolts, then position manual lever in Park position.
2.
Insert a {3/32} inch drill into switch. Move switch as needed to allow drill to rest against case, Fig. 3.
3.
Torque switch attaching bolts to 55---75 inch lbs., then remove drill from switch.
A4LD UNITS
1.
Disconnect battery ground cable(s).
2.
Disconnect neutral start switch electrical harness from switch.
3.
Using a suitable tool, remove neutral start switch and O-ring.
4.
Install new switch and O-ring.
5.
Torque switch to 7---10 ft. lbs.
6.
Connect neutral start switch electrical harness on to switch.
7.
Connect battery ground cable(s) and check switch operation.