Ranger 2WD L4-140 2.3L SOHC (1984)
Wheel Cover: Customer Interest
Hubcap - Applique Loosening
Article No. 85-2-20
HUBCAP - APPLIQUE LOOSENING
LIGHT TRUCKS 1983-84 RANGER
Some 1983-84 Ranger vehicles may experience poor adhesion of the applique (E3TZ-1137-A) to the wheel ornament assembly. This concern may be
corrected by the following service procedure:
^
Clean center of existing ornament, removing all traces of residual adhesive or other contamination.
^
Apply approximately 1/16" thick coating of GERTV-108 clear adhesive to center flat area of ornament.
^
Apply replacement applique E3TZ-1137-A using light pressure to effect bond and disperse adhesive.
^
Clean off any adhesive visible after assembly of applique.
^
Allow adhesive to cure for two hours before driving vehicle.
This service procedure eliminates the past practice of replacing the entire ornament assembly when the hubcap applique becomes loose.
PART NUMBER
PART NAME
CLASS
E3TZ-1137-A
Hubcap Center Applique
B
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP113OA84
TIME:
0.3 Hr. DLR. CODING: Basic Part No. 1130 Code: 03