Ranger 2WD L4-140 2.3L SOHC (1984)
Use the following procedure to install the spacer pad (Figure 8):
^
Briefly submerge pad in ordinary tap water to moisten the interior core of the spacer pad.
^
Carefully pry the middle edge of the heat shield approximately 1/2 inch away from the converter body.
NOTE:
Care must be taken to avoid damaging the converter body, shield or attaching welds.
^
Install the moistened spacer pad between the heat shield and converter body as shown in Figure 8.
^
Reposition the middle edge of the heat shield to its original location.
PART NUMBER
PART NAME
CLASS
E3TZ-5F215-A
Spacer Pad
C
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP5222A83
TIME:
0.3 Hr. DLR. CODING: Basic Part No. 5E212 Code: 56