Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Parking Brake Cable: Service and Repair
Front Cable and Conduit
REMOVAL
1. Remove the parking brake control.
2. Disconnect the front parking brake cable from the parking brake control.
3. Remove the front parking brake cable and conduit housing.
1
Compress the front parking brake cable and conduit-to-parking brake control clip.
2
Remove the front parking brake cable and conduit housing.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Make sure cable is routed through loop on take-up spool.