Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
2. Disconnect the speed control servo electrical connector.
3. Remove the speed control actuator cable from the speed control servo.
^
Depress the speed control actuator cable cap tab inward and twist the actuator cap counterclockwise to remove.
4. Remove the speed control servo bracket bolt and remove the servo.
INSTALLATION