Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
8. Rotate the differential case to make sure it rotates freely.
9. Use the Dial Indicator with Bracketry to measure the ring gear backlash.
-
If the backlash is within specification, go to Step 14. The specification shown is the full allowable range.
-
If a zero backlash condition occurs, go to Step 10.
-
If the backlash is not within specification, go to Step 11.
10. If a zero backlash condition occurs, add 0.51 mm (0.020 inch) to the RH side and subtract 0.51 mm (0.020 inch) from the LH side to allow
backlash indication. Check the backlash. Repeat Step 9.