ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Alignment - Specifications|Page 4342 > < Front Alignment - Specifications|Page 4340
Page 3
background image

The following chart provides average camber and caster settings.

*

Defined as (LH camber + RH camber) divided by

2.

Vehicles set to this specification, as measured with vehicle loaded to normal loading conditions will result in optimum tire wear.

** Defined as (LH caster + RH caster) divided by
2.

These are not recommended values for settings. They are only maximum and minimum limitations.

^

Vehicles which exceed the maximum average caster value shown above may result in shimmy concerns.

^

Vehicles operated below the minimum average caster value shown may result in wander and poor steering returnability concerns.

If the vehicle is not within these minimum and maximum average caster values, or if the vehicle has experienced any of these listed steering/handling
concerns, the average caster should be set in accordance with the ride height/caster chart in the Shop Manual.

OTHER APPLICABLE ARTICLES: 89-21-10
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

3200

Front Alignment - Specifications|Page 4342 > < Front Alignment - Specifications|Page 4340