Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Adjuster Components (Part 1 Of 2)
Adjuster Components (Part 2 Of 2)
10. Apply Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B to the threads of the brake adjuster
screw, the thrust washer and the brake shoe adjusting screw stud or socket. Turn the adjusting screw into the brake shoe adjusting screw nut to the
end of the threads and then loosen it one-half turn. Refer to illustrations.
CAUTION: Install the brake adjuster screw in the same location from which it was removed. Interchanging the brake adjuster screws from one
side of the vehicle to the other will cause the rear brake shoe and lining to retract rather than expand each time the automatic adjusting mechanism
is operated.
11. Assemble the adjuster and install the assembly between the shoe ends.
Brake Shoe Adjusting Lever Cable