Ranger 2WD V6-245 4.0L VIN X SFI (1997)
2. If the inner or outer bearing cups were removed, install replacement cups using Driver Handle T80T-4000-W and Bearing Cup Replacer
T73T-1202-A. Seat cups fully against step in the hub.
3. Using Rotunda Bearing Packer 108-0007-4 or equivalent pack the bearing cone and roller assemblies with Premium Long-Life Grease XG-1-C or
-K or equivalent meeting Ford specification ESA-M1C75-B.
NOTE: If a packer is not available, work as much grease as possible between the rollers and cages. Grease the cone surfaces.
4. Place the bearing cone and roller assembly in the inner cup. A light film of grease should be included between the lips of the new grease seal.
Additional Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B may be added to the new grease
seal if required.
5. Install the seal with Hub Seal Replacer T83T-1175-B and Driver Handle T80T-4000-W.
CAUTION: When installing seal, be sure it is properly seated.