Ranger 2WD V6-245 4.0L VIN X SFI (1997)
![background image](/ford/ranger_2wd/v6-245_4.0l_vin_x_sfi/Page-1623002.png)
4. Remove the solenoid clamp and EPC and SS2 solenoids.
5. Carefully disconnect the turbine shaft speed (TSS) sensor connector from the 16-pin case connector.
CAUTION: Do not pry on other wires or damage the connector case surface.
6. Use a screwdriver to carefully remove the case connector retaining spring.
CAUTION: Do not overstretch the case connector retaining ring.