Transmission Pressure Regulating Solenoid Replacement
![background image](/ford/ranger_2wd/v6-245_4.0l_vin_x_sfi/Page-1751003.png)
7. Remove the solenoid clamp.
8. Remove solenoids and service as required.
INSTALLATION
1. Install the TCC, SS4, SS2, EPC solenoids, solenoid clamp and screws. Tighten to 6-8 Nm (53-71 inch lbs.).
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.