Ranger 2WD V6-245 4.0L VIN X SFI (1997)
![background image](/ford/ranger_2wd/v6-245_4.0l_vin_x_sfi/Page-1753003.png)
7. Carefully push down on the top of the connector until it stops. Depress the tab on the back side of the connector and push down on the connector.
CAUTION: Do not damage the connector or harness.
8. Remove the connector and harness through the bottom of the case.
INSTALLATION
1. Replace O-rings on connector.
2. Install the case 16-pin connector through the case until a click is heard.
NOTE: Make sure the tab is in the lock position.
3. Carefully install the TSS connector into the 1 6-pin case connector.
NOTE: Align the slot on the TSS connector with the slot on the 16-pin case connector.