Ranger 2WD V6-245 4.0L VIN X SFI (1997)
4. Use a 10 mm socket to remove the M6 x 30 mm manual valve detent spring screw. Remove the manual valve detent spring.
5. Use a 10 mm socket to remove the four M6 x 20 mm low/reverse servo cover screws. Remove the low/reverse servo cover, gasket and the servo
piston and rod assembly.
6. Use a 10 mm socket to remove the sixteen M6 x 40 mm, four M6 x 45 mm, two M6 x 35 mm and one M6 x 30 mm main control valve body
screws.
CAUTION: Support main control valve body.