Ranger 2WD V6-245 4.0L VIN X SFI (1997)
10.
Install the manual valve detent spring. Install the manual valve detent spring screw and tighten to 8-11 Nm (71-97 inch lbs.).
11.
Install the low/reverse servo assembly into the case.
12.
Install the low/reverse servo and rod assembly cover, new gasket and the four servo cover-to-case screws. Tighten the screws in sequence as
shown to 12-14 Nm (106-124 inch lbs.).
13.
Carefully press down to install the solenoid connectors on the solenoid.