Ranger 2WD V6-245 4.0L VIN X SFI (1997)
![background image](/ford/ranger_2wd/v6-245_4.0l_vin_x_sfi/Page-1882016.png)
6. Use a screwdriver to carefully remove the case connector retaining spring.
CAUTION: Do not overstretch the case connector retaining ring.
7. Carefully push down on the top of the connector until it stops. Depress the tab on the back side of the connector and push down on the connector.
CAUTION: Do not damage the connector or harness.
8. Remove the connector and harness through the bottom of the case.
INSTALLATION
1. Replace O-rings on connector.