Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Flywheel: Service and Repair
Flywheel Dowels
REMOVAL
Prior to dowel removal, you must remove the clutch pressure plate.
Dowels can be removed by using a drift pin where the dowel is installed in a drilled hole and vise grip pliers where the dowel is installed in a blind
hole. They should be pulled or driven from their seat, taking care not to damage dowel hole or surface area around dowel during removal.
INSTALLATION
All dowels can be installed by driving them into place using a brass or plastic mallet. Care should be exercised to drive the dowel squarely into place
until fully seated and not to damage surrounding surface areas.