Ranger 2WD V6-3.0L (2008)
Thermostat Bypass Hose: Service and Repair
Bypass Tube - 3.0L
Removal and Installation
NOTE: The bypass tube and the lower radiator hose are a molded, one-piece assembly.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Disconnect the bypass tube from the water pump.
4. Disconnect the lower radiator hose from the engine.
5. Disconnect the lower radiator hose from the radiator and remove the lower radiator hose.
6. To install, reverse the removal procedure.