Ranger 2WD V6-3.0L (2008)
Air Register: Service and Repair
Register - Center
REGISTER - CENTER
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Using the special tools, remove the audio unit.
-
Disconnect the antenna cable and electrical connectors.
2. Remove the center instrument panel finish panel.
1
Remove the 2 screws.
2
Disengage the spring clips and remove the instrument panel finish panel.
-
Disconnect the electrical connectors.
3. Release the 8 clips and remove the center registers.
4. To install, reverse the removal procedure.