Ranger 2WD V6-3.0L (2008)
![background image](/ford/ranger_2wd/v6-3.0l/Page-1066003.png)
3. Install the camshaft synchronizer housing bolt.
-
Tighten to 30 Nm (22 lb-ft).
4. Position the CMP sensor and install the 2 bolts.
-
Tighten to 3 Nm (27 lb-in).
5. Connect the CMP sensor electrical connector.
3. Install the camshaft synchronizer housing bolt.
-
Tighten to 30 Nm (22 lb-ft).
4. Position the CMP sensor and install the 2 bolts.
-
Tighten to 3 Nm (27 lb-in).
5. Connect the CMP sensor electrical connector.