Ranger 2WD V6-3.0L (2008)
12. Release the lower clockspring retaining clip.
13. Remove the screw, the passive anti-theft system (PATS) antenna and the key-in-ignition warning indicator switch from the lock cylinder housing.
14. Release the remaining 2 clockspring retaining clips and remove the clockspring.
Installation
Vehicles receiving a new clockspring
1. NOTE: A new clockspring is packaged in a centralized position and fixed in position with a key.
Remove the key from the clockspring, holding the rotor in its centralized position.
-
Do not allow the clockspring rotor to turn.
Vehicles needing clockspring recentering